| Customization: | Available |
|---|---|
| After-sales Service: | Engineers Respond in 1 Minute |
| Warranty: | 2-Year for Laser Source, 1-Year for Machine |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Laser Welding Machine Technical Parameters: Explore the cutting-edge features and comprehensive specifications of our exceptional laser welding machine. Meticulously engineered for unparalleled precision and unmatched efficiency, this state-of-the-art equipment sets a new benchmark in the industry, redefining standards with its innovative design and superior performance.
| Laser wevelerngth | 1080(±10)nm | ||
| Ouput fiber length | 10M | ||
| Max laser power | 1500W | 2000W | 3000W |
| Ratnd power | 6KW | 7KW | 8KW |
| Suply wiage(V) | 220V/50HZ | 220V/50HZ | 380V/50HZ |
| Spot atijusiment range | 0.1-5MM | 0.1-5MM | 0.1-5MM |
| Laser fequeney | 1-10000HZ | 1-10000HZ | 1-10000HZ |
| Conling syeem | Cw 1500 | Cw2000 | Cw3000 |
| Observing system | Red ligit | ||
1. Provide the meticulous testing and comprehensive packaging videos after the machine is expertly produced, ensuring transparency and customer confidence.
2. We offer an array of prestigious quality inspection certificates recognized by various countries, underscoring our commitment to superior standards.
3. With 12 years of proficient independent production and pioneering R&D, we guarantee exceptional quality while skillfully keeping costs remarkably low.
Answer:
It is mainly suitable for common metal materials such as stainless steel, carbon steel, aluminum alloy, copper, and galvanized sheet. Different materials require parameter adjustments (e.g., aluminum alloy needs high-frequency pulse mode), and some highly reflective materials (e.g., pure copper) require special configurations.
Answer:
Typically, it can weld0.1-6 mm (stainless steel/carbon steel), while aluminum alloy is slightly weaker (0.5-4 mm). The actual thickness depends on the machine's power (e.g., 1000W for 2 mm, 3000W for 5 mm). It is recommended to match the power to your needs.
Answer:
Key advantages include:
Smaller heat-affected zone, less deformation;
No filler wire needed (autogenous welding) or minimal wire feeding;
2-3 times fasterwelding speed;
No smoke/dust (requires dust extraction equipment);
Lower skill threshold, easier for beginners.
Answer:
Laser isClass 4, so safety measures are mandatory:
Operators must wearlaser safety goggles;
Work area must havebarriers/warning lights;
The machine must includeemergency stop buttonsandinfrared safety sensors.
Answer:
Energy consumption is lower than traditional welding (e.g., a 1000W machine uses ~1 kWh per hour), but cooling systems (air/water) also consume power. Main costs includeargon gas (shielding gas)andreplacement of consumables(lenses/nozzles).
Answer:
Laser welding is sensitive to gap spacing-keep gaps under 0.2 mm(varies by material thickness). For larger gaps, useautomatic wire feedingor modify the joint design.
Answer:
Routine maintenance is simple:
Regularly cleanlenses/nozzles;
Check thecooling system;
Common issues includelens contaminationorcooling alarms. Most manufacturers offerremote supportand1-3 years of warranty.
Answer:
Possible causes and solutions:
Porosity: Check shielding gas flow/purity, adjust beam angle;
Cracks: Preheat material (e.g., high-carbon steel) or reduce speed;
Parameter issues: Contact the manufacturer to optimize power/frequency settings.
Answer:
Based on needs and budget:
Thin sheets (1-3 mm): 1500W;
Medium-thick plates (4-6 mm): 2000-3000W;
Aluminum/high-reflectivity materials: 1500W+ with pulse function.
11. Question: Do you provide training?
Answer:
Training: We offerfree on-site/online training, covering:
Machine setup & safety protocols;
Parameter adjustment for different materials;
Troubleshooting common issues.
Support: Post-training, we provideoperation manuals + video guides, and technicians are available for remote assistance.
){kind=link}